13-11
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
119: Set Allowed Numbers Table Slot
This command allows you to set one of the slots in the allowed numbers table. For a
description of this table and how to use it, see the explaination of the dialing tables before
Command 110.
<119> sss d..d
Parameters:
- 119 is the default command name.
- SSS is the slot number (000..499)
- D..D is the area code/prefix (do not include the last four digits of the phone
number). The '#' digit is a wildcard that matches any digit.
120: Recall Allowed Numbers Table Slot
This command allows you to recall the contents of one of the slots in the allowed numbers
table. For a description of this table and how to use it, see the explaination of the dialing tables
before Command 110.
<120> sss
Parameters:
- 120 is the default command name.
- SSS is the slot number (000..499)
To Next Page
Loading...
Need help?
General
