4-14
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
025: Sets the Time of Day Clock
This command allows you to set the time of day clock on the RLC-Club.
<025> hh mm a/p
Parameters:
- 025 is the default command name.
- HH is the actual hours with leading zeros
- MM is the actual minutes with leading zeros
- a/p is the AM/PM selection (1=PM, 0=AM)
Example:
Want to set the time to 3:25 PM
<025> 03 25 1 D or unkey or <Enter>
Voice Response:
"<Hour> <Minute> <AM/PM>"
026: Recall the Time of Day Clock in Male Speech
This command allows you to read the Time of Day Clock. The readback is Male time reading.
Refer to Command 025 for setting the clocks time.
<026>
Parameters:
- 026 is the default command name.
Voice Response:
"Male voice: <Hour> <Minute> <AM/PM>"
To Next Page
Loading...
Need help?
General
