4-17
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
029: Recall the Date
This command allows you to read the date stamp of the controller. The readback is Male date
reading. Refer to Command 028 for setting the date.
<029>
Note: if you want to recall the date as part of a message, you may want to try the variable
words (Appendix B, words 800 and above). Speaking those words with command 036 will let
you format the date readback any way you like it.
Parameters:
- 029 is the default command name.
Voice Response:
"This is <Month> <Day> <Year> <Day of Week>"
To Next Page
Loading...