4-13
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
021: Recall a Timer Value
This command allows you to recall the value of a programmed timer.
<021> xxx
Parameters:
- 021 is the default command name.
- XXX is the selected timer to be programmed (See Command 020 for Timers)
022: Restart a Selected Timer
This command allows you to reset and restart a selected timer back to its original value. The
timer will then begin to run again from its original value.
<022> xxx
Parameters:
- 022 is the default command name.
- XXX is the selected timer to be programmed (See Command 020 for Timers)
023: Reset a Selected Timer
This command allows you to reset and cancel a timers operation.
<023> xxx
Parameters:
- 023 is the default command name.
- XXX is the selected timer to be programmed (See Command 020 for Timers)
To Next Page
Loading...
Need help?
General
