12-20
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
160: Clear Analog High/Lows
This command allows you to reset the analog high/low values. They are reset to whatever the
current value is. The readings can be read by speaking the appropriate word numbers (see
Appendix B).
<160> a l..l
Parameters:
- 160 is the default command name
- A is 0 for the low value, 1 for the high value, 2 to clear both the low and high values
- L..L are the analog input lines
To Next Page
Loading...