11-5
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
087: Set Random or Rotating Pending ID's
This command allows you to select whether the four pending ID's for a port will be sent in
random order or whether they will just be rotated through (1, 2 ,3, 4, 1, ...).
<087> p c
Parameters:
- 087 is the default command name.
- P is the port for the ID's (1..3)
- C is the ID control, 1 for random, 0 for rotating (default is rotating)
088: Recall Random or Rotating Pending ID Selection
This command allows you to recall which ports rotate through the pending ID's (1, 2 ,3, 4, 1, 2,
3, 4, 1, 2, ...) and which ones select them in random order. Voice response will list the ones
that rotate, the others are random.
<088>
Parameters:
- 088 is the default command name.
To Next Page
Loading...
Need help?
General
