2-5
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
002: Disconnect one Port from another Port
This command allows you to disconnect one radio port from another radio port.
<002> x y
Parameters:
- 002 is the default command name
- X is the first port to disconnect
- Y is the second port to disconnect
Default:
- Port 1 defaults as a repeater
- Port 2 defaults as a link
- Port 3 is the autopatch
Note:
If you want to break all of the connections to a port, check out Command 061.
Example 1:
Disconnect Port 1 from Port 2
<002> 1 2 D or unkey or <Enter>
Response:
Voice response "1 Connect 2 Off"
Example 2:
Port 2 is currently a repeater port. You want to return the port to a link
<002> 2 2 D or unkey or <Enter>
Response:
Voice response "2 Connect 2 Off"
To Next Page
Loading...
Need help?
General
