2-10
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
061: Disconnect all Ports from a Radio Port
This command allows you to disconnect all of the other radio ports from one radio port with
one command. Please note that if you execute this command for a repeater port, it will
disconnect it from itself, breaking it out of repeater mode. To make it a repeater again, you will
have to use command 000. If you only want to break some of the connections to a port, see
commands 001 and 002.
<061> p
Parameters:
- 061 is the default command name
- P is the port to disconnect all other ports from
Shortcut:
If you want to break all of the connections to several ports, list all of them. For
example: 061 123 D or unkey or <Enter> breaks every connection in the whole crosspoint.
Example:
Disconnect all other ports from Port 1
<061> 1 D or unkey or <Enter>
Voice Response:
"1 Clear"
To Next Page
Loading...
Need help?
General
