10-1
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
Chapter 10: Scheduler
How the Scheduler Works:
The scheduler provides you with the ability to have up to 100 events occur automatically at
hourly, daily, weekly, monthly or yearly intervals. The information used to store when event is
supposed to occur and what it is supposed to do is stored in a "scheduler slot". The information
about each event you want to set up must be stored in a different scheduler slot. You can
change the contents of a scheduler slot by simply programming something different into that
slot. Each event can call one command or user macro. If you call a macro, you can execute as
many commands as you want in response to that scheduler event. You can use command 084
to keep a scheduled event from happening (disabling it) and to re-enable it later. Programming
is explained in the command descriptions.
To Next Page
Loading...