1-7
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
Voice Level Adjustment:
- Generate a voice test message using RLC-CLUB command 036
Example: 036 001 002 003 004 005 006 007 D or unkey or <Enter>
- Adjust 'Voice Level Adjust' pot to 2 Khz deviation, this adjustment is for all transmitters. The
adjustment is located next to the audio transformer and above the 'XECOM' module.
Tone Generator Adjustment:
- Generate a tone test sequence using RLC-Club Command 040:
040 2000 0001 1000 D or unkey or <Enter> will generate a 1000Hz tone for 20 seconds
- Adjust "Tone" pot on the RLC-Club to your requested deviation, 1.5Khz deviation is typical
To Next Page
Loading...