4-9
Version 1.73 Copyright © 1997 Link Communications Inc. 1/18/97
User Timers:
These timers are not normally used by the controller. They are provided for your use. You can
start them running by executing Command 022 and stop them with 023 (or they will stop
automatically when they expire). Also, when one of these timers expires, the corresponding
special macro (see Chapter 8) is automatically executed. This allows you to start these timers
when certain things in the controller happen, and do something when the timer expires. These
timers are programmed in one second increments.
Timer Number Description Defaults
035 User Timer 00 0 sec. (000)
036 User Timer 01 "
037 User Timer 02 "
038 User Timer 03 "
039 User Timer 04 "
040 User Timer 05 "
041 User Timer 06 "
042 User Timer 07 "
043 User Timer 08 "
044 User Timer 09 "
045 User Timer 10 "
046 User Timer 11 "
047 User Timer 12 "
048 User Timer 13 "
049 User Timer 14 "
050 User Timer 15 "
To Next Page
Loading...
Need help?
General
