MacDon M Series - Page 168

CAB DISPLAY MODULE (CDM)
Figure 4.2: M155/M205 CDM
A-SideDisplay
B-Main
Display
C - Select Switch
D - Menu Item Scroll Forward E - Menu Item Scroll Backward F - Program Switch
Side Display: D isplays softwar e revision status.
• Upper line – C### (CDM)
• Lower line – M### X### (WCM)
Main Display: Displays menu item and selection
5
.
• Upper line – Menu item
• Lower line – Selection
Select Switch: Places monitor into Program Mode with PROGRAM switch. Press to accept menu item and advance
to next item.
Menu Item Scroll Forward: Displays value under menu item.
• Push to scroll forward
• Holddownforfastscroll
6
Menu Item Scroll Backward: Displays value under menu item.
• Push to scroll backward
• Holddownforfastscroll
6
Program Switch: Places monitor into program mode. Press while pressing select switch.
5. The current sele ction is flas hing.
6. Fast scroll applies only when changing KN IFE SPEE D, OVERLOAD PRESSURE, and TIRE SIZE.
147962 154 Revision A