CAB DISPLAY MODULE (CDM)
4. Press right (B) arrowto select YE S. PressSELE CT (C).
• TO CALIBRATE SELECT is displayed in upper line.
5. Press left (A) or right (B) arrow until HEADER HEIGHT
is display ed on the lower line. Press SELECT (C).
• CALIBRATING HEIGHT is displayed on the
upper line.
• RAISE HEADER HOLD is displayed on the
lower line .
Figure 4.5
1: M105 Header Height Calibration
Figure
4.52: M155 Header Height Calibration
Figure 4.53: M205 Header Height Calibration
147962
17
4
Revision A
To Next Page
Loading...
