CAB DISPLAY MODULE (CDM)
5. Press SELECT (B) until ENTE R SEN SOR SETUP? is
displayed on the upper line.
• NO/YES is displayed on the lower line.
6. Press right(A) arrow to select YES. P ress SELECT (B).
• HEADER HT S ENSOR is displayed on the
upper line.
• KNIFE SPEED SENSOR is displayed on the
lower line .
• ENABLE/DISABLE is displayed on the lower line.
Figure 4.2
44: M105 Diagnostic Functions
Figure
4.245: M155 Diagnostic Functions
Figure 4.246: M205 Diagnostic Functions
147962 258 Revision A
To Next Page
Loading...
