CAB DISPLAY MODULE (CDM)
5. Press SELEC T (B) until ACTIVATE F UN CTIONS? is
displayed on the upper line.
• NO/YES is displayed on the lower line.
6. Press right(A) arrow to select YES. P ress SELECT (B).
7. Press S ELE CT (D) until ACTIVATE FU NCTIONS? is
displayed on the upper line.
• NO/YES is displayed on the lower line.
8. Press right (C) arrow to select YES. Press
SELECT (D).
Figure 4.2
85: M105 Functions
Figure
4.286: M155 Functions
Figure 4.287: M205 Functions
147962 276 Revision A
To Next Page
Loading...
