CAB DISPLAY MODULE (CDM)
5. Press S ELECT (B) until ACTIVATE FUNCTIONS? is
displayed on the upper line.
• NO/YES is dis playe d on the lower lin e .
6. Press right (A) arrow to select YES. Press SELECT ( B).
7. Press S ELECT (B) until ACTIVATE FUNCTIONS? is
displayed on the upper line.
• NO/YES is dis playe d on the lower lin e .
8. Press right (A) arrow to select YES. Press SELECT ( B).
Figure 4.2
97: M105 Functions
Figure
4.298: M155 Functions
Figure 4.299: M205 Functions
147962 281 Revision A
To Next Page
Loading...
