MacDon M Series - Page 390

REFERENCE
Table 6.18 M205 System Capacities
Lubricant/Fl
uid Location Description
Capacity
Grease
As required unless
otherwise specified
SAE multi-pu rpo se high temperature
extreme pressure (EP2) performance
with 1% max Molybdenum Disulphide
(NLGI Grade 2) lithium base
Diesel fuel
Fuel tank
Diesel Grade No.2, or Diesel Grade
No.1and2mix
32
; refer to 6.5
Fuel Specifications, page 378 for
more information
378 liters
(97 US gallons)
Hydraulic oil Hydraulic reservoir
SAE 15W-40
compliant with SAE specs
for API cl
ass SJ and CH-4 engine oil
65 liters
(17.2 US gallons)
Gearbox
SAE 8 0W-14 0, API service class GL -5.
Fully synthetic gear lubricant,
(SAE J2360 pre ferred)
2.1 liters
(2.2 US quarts)
Gear lubricant
Wheel drive
33
SAE 75W-90, API service class GL-5.
Fully synthetic gear lubricant,
(SAE J2360 pre ferred)
1.4 liters
(1.5 US quarts)
Antif
reeze
Engine cooling
system
ASTM D
-6210 and
Fleet
guard ES Compleat
®
See be
low
31 liters
(8.2 US gallons)
34
Engine oil Engine oil pan
SAE 15W-40 compliant with SAE specs
for API class SJ and CH-4 engine oil
14.2 liters
(15.0 US quarts)
Air c
onditioning
refr
igerant
Air c
onditioning
syst
em
R134
A
2.27 kg (5 lb .)
Air conditioning
refrigerant oil
35
Air conditioning
system total
capacity
PAG SP-15 240 cc (8.1 fl.oz.)
32. Optional when operating temperature is b elow 0°C (32°F).
33. SAE 85W-140 API Service Cla ss GL-5. E xt re me Pressure G e ar Lubric an t is used before initial change.
34. Equal p a rts with water, h igh qu ality, soft, de-ionized or d istilled water as rec om mended by supplier.
35. New compressor (MD #203013) comes filled. If installing on 201 4 and prior, refer to Service Bulletin 1254.
147962 376 Revision A