ASSEMBLING THE W INDROWER
19. Remove the caps from three fittings (blue [ A],
orange [B], and yellow [C] ties) on the valve block from
the inboard side of the frame.
Figure 3.43: Valve Block
20. Loosen bolts (A) and move valve block to improve
access th rough the hole in the frame in order to ins ert
wrenches and tighten fittings.
Figure 3.44: Valve Block
21. Retrieve matching hoses (blue [A], orange [B], and
yellow [C] ties) and make connections on v alve block.
Tighten fittings.
22. Reposition valve block and retighten bolts.
Figure 3.45: Valve Block
147962 46 Revision A
To Next Page
Loading...
