ASSEMBLING THE WINDROWER
4. From underneath the machine, locate plug (A) on the
side of the header drive pump housing.
5. Loosen plug (A) to bleed the pump housing. Retighten
theplugonceoilstartstorunout.
Figure 3.
114: Header Drive Pump Housing
6. From above the machine, locate plug (A) on the top of
the header drive pump housing.
7. Loosen plug (A) to bleed the pump housing. Retighten
theplugonceoilstartstorunout.
Figure 3.115: Header Drive Pump Housing
147962
7
7
Revision A
To Next Page
Loading...
