Operating elements for driving
3.2 Brief description of the operating elements
3 - 78 3 302 819 en Operating manual
GMK3060
13.12.2018
– Folding in
• Release the spring latch (3) and push in the
access ladder (4).
• Lift the locking bar (3) for releasing and fold
the ladder (2) upwards.
• Swing the ladder (2) on the carrier.
• Secure the ladder (2) with the spring latch (1).
Hook-on ladders
– For the use
• Release the ladder from the holder (5) and
remove from the carrier.
• Hang the ladder (1) in the bores (4) – insert
the pegs (3) into the bores all the way to the
end stop.
• Fold out the spacer (2).
– For driving
• Push the ladder (1) with the lowest rung
below the angle bracket (2).
• Secure the ladder on the holder (5) using the
retaining pin (3).
• If necessary, secure the ladder with a padlock
at the bore (4).
To Next Page
Loading...
Need help?
General
