Malfunctions in driving mode
8.5 Emergency operation and breakdown assistance
Operating manual 3 302 819 en 8 - 37
GMK3060
13.12.2018
8.5.5 Inflating the tyres yourself
In an emergency, if an appropriate filling hose is available you can inflate the tyres
using the compressed air system of the truck crane.
A tyre inflator connection set to a pressure of 10 bar (145 psi) is provided for this
purpose. The tyres must not be filled above this maximum pressure.
After you have inflated the tyres yourself, always drive directly to a service station
or repair shop and adjust the tyre pressure.
The filling hose has a tyre inflator connection (2) and a connection (1).
Connecting the
filling hose
• Remove the caps (3) and (4).
• Fasten the connection (1) to the filler
connection (2).
You can now inflate the tyres.
s
S
Risk of damage if the tyre pressure is too high!
Depending on the size of the tyres, the prescribed pressure may be less than
10 bar (145 psi);
à Tyres, p. 1 - 14. Fill the tyres no more than the specified
pressure. Interrupt the filling procedure if necessary. This prevents the tyres
becoming damaged and bursting while driving.
To Next Page
Loading...
Need help?
General
