EasyManuals Logo

Manitowoc GROVE GMK3060 User Manual

Manitowoc GROVE GMK3060
906 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #246 background imageLoading...
Page #246 background image
Driving mode
5.4 Off-road driving
5 - 62 3 302 819 en Operating manual
GMK3060
13.12.2018
5.4.3 Freeing a stuck truck crane
Rocking the truck
crane free
If the truck crane is stuck in terrain, you can try to free it by driving back and forth
(rocking it free):
If you are trying to rock the crane free, you should switch on the transverse
differential locks and the longitudinal differential lock.
• Switch to transmission mode D or R.
• Select a smaller starting gear with the gearshift lever.
• Start driving as far as you can as high as possible.
• Release the accelerator. The transmission declutches disengage.
• Let the truck crane roll in the opposite direction as far as it will go.
• Start driving, again to the highest point.
• Repeat driving and letting the truck crane roll back until it has rocked itself free.
H
It does not make sense to switch between gear positions D and R, as switching
to R is only performed when the truck crane is stationary and takes a few
seconds. You would not be able to take advantage of the momentum
generated by the change of direction.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc GROVE GMK3060 and is the answer not in the manual?

Manitowoc GROVE GMK3060 Specifications

General IconGeneral
BrandManitowoc
ModelGROVE GMK3060
CategoryConstruction Equipment
LanguageEnglish

Related product manuals