Operating elements for crane operation
9.2 Brief description of the operating elements
Operating manual 3 302 819 en 9 - 101
GMK3060
13.12.2018
9.2.9 Outrigger control units
à Extending/retracting outrigger beams, p. 12 - 33
à Extending/retracting supporting cylinders, p. 12 - 39
The display fields must be switched on for crane operation – in the Outriggers
menu in the crane cab.
General
information
The function of the general elements is independent of the menu shown on the
Outrigger display.
Searchlights
Light up when the ignition is on.
Pre-selecting high-speed/normal speed mode
Horn
The ignition must be switched on.
s
– Display field lighting off: Ignition on and no button activated yet or no
button activated within the last 10 seconds
– Display field lighting on: Press any button
à p. 12 - 34
1 Pre-select: Press button – high-speed mode pre-selection on
2 Pre-select: Press button – normal speed pre-selection on
1 – Press: Carrier horn on
To Next Page
Loading...
Need help?
General
