Driving mode
5.2 Operating the transmission
5 - 34 3 302 819 en Operating manual
GMK3060
13.12.2018
5.2.9 DM and RM transmission mode
The DM and RM transmission modes are intended for manoeuvring the vehicle
without changing gears, e.g. for moving the truck crane while loaded.
You can limit the maximum speed.
Switching on
• Stop the truck crane and release the accelerator.
• Wait until the engine runs at idling speed.
• Shift into DM or RM position for the required direction of travel.
The appropriate transmission mode is selected and appears on the display.
In the DM and RM transmission modes
– The transmission does not shift
– Manual gear shifting is not possible.
• Press the accelerator pedal.
To Next Page
Loading...
