Starting/stopping the engine – for driving
4.1 Starting the engine – from the driver's cab
4 - 12 3 302 819 en Operating manual
GMK3060
13.12.2018
4.1.8 Starting the engine
H
This section describes only how to start the engine from the driver's cab. You can
also start the engine from the outrigger control units;
à p. 4 - 17.
For operating the engine;
à Separate engine manufacturer's operating manual.
The engine can only be started if:
– The bridging plugs have been inserted in all sockets of the superstructure for
the hand-held control;
à p. 14 - 43.
– The lamp (1) has gone out (superstructure ignition off).
– The parking brake is applied.
– The transmission is in the neutral position N;
à p. 5 - 26.
To Next Page
Loading...
