Manitowoc GROVE GMK3060

Driving mode
5.3 Driving and parking the truck crane
Operating manual 3 302 819 en 5 - 39
GMK3060
13.12.2018
5.3.2 Cruise control
Cruise control enables you to drive at a constant speed without pressing the
accelerator.
Switching on
Pre-selecting
• Press the button (1) once.
– On the CCS display – Symbol (2) displayed in grey.
– Cruise control is preselected.
You can switch on the cruise control only at speeds greater than 15 km/h (9 mph).
Switching on
• Press the switch (1) upwards/downwards once
– On the CCS display – Symbol (2) displayed in black.
– On the CCS display – Symbol (3) displayed.
The current speed is maintained.
You can exceed this speed with the accelerator. After the accelerator is released,
cruise control reverts to the set speed.
H
On downhill slopes, the speed set may be exceeded since cruise control does not
brake the truck crane. Switch the cruise control off on downhill slopes.
s
G
Risk of accidents due to carelessness!
Be ready to brake at all times when cruise control is switched on!
Switch cruise control on only if the traffic situation permits a constant speed.