Rigging work
12.5 Operating the outriggers
Operating manual 3 302 819 en 12 - 29
GMK3060
13.12.2018
12.5.2 CHECKLIST: retracting the outriggers
H
This checklist is not a complete operating manual. There are accompanying
operating instructions which are indicated by cross-references.
Observe the warnings and safety instructions there!
1. Retract the outrigger cylinders as far as possible;
à p. 12 - 39.
2. Move the outrigger pads into the driving position and secure them;
à Moving into the driving position, p. 12 - 37.
3. Fully retract and secure all outrigger beams;
à For on-road driving, p. 12 - 32,
à Extending/retracting outrigger beams, p. 12 - 33.
4. Stow away packing material safely, if applicable.
5. Switch on suspension (release locking) – symbol green (suspension on);
à p. 5 - 17.
s
To Next Page
Loading...
