Starting/switching off the engine – for crane operation
10.2 Starting the engine – from the crane cab
10 - 6 3 302 819 en Operating manual
GMK3060
13.12.2018
10.2.5 Comparison of switching states
When the ignition is switched on, various switching operations are performed
automatically and the switching states of the differential locks and the steering
are compared.
– The vehicle parking brake must be engaged. The lamp (1) lights up –
symbol (2) in the Driving menu – red.
– The transmission must be switched to neutral position – symbol (1).
If the symbol (1) is grey then switch the ignition off and on again.
– The switching procedures for the last stored
states are initiated.
The symbols (1) and (2) show the current
states.
If a symbol (1) shows an intermediate position
(yellow), you must actuate the steering, or drive
slowly forwards and backwards, so that the
locking processes are completed mechanically.
To Next Page
Loading...
Need help?
General
