Malfunctions in driving mode
8.3 Warning and error messages
8 - 10 3 302 819 en Operating manual
GMK3060
13.12.2018
8.3.3 Warning messages on the CCS display
A warning message indicates that certain values
do not correspond to a target value
If CCS detects a warning or a fault then a symbol
is displayed in the display area (1).
Meaning of the symbols
The colour of the symbols indicates whether a warning or malfunction message
is active in the corresponding area.
–Symbol yellow – malfunction.
–Symbol red – warning message.
– No symbol – no malfunction or warning message.
If a symbol is displayed in red or yellow, perform the following checks.
S
Risk of damage if warning messages are not observed!
Observe the following information in good time and take the appropriate remedial
measures if a warning message appears. This prevents these malfunctions
causing defects in the truck crane.
To Next Page
Loading...
Need help?
General
