Starting/stopping the engine – for driving
4.3 Switching off the engine
4 - 20 3 302 819 en Operating manual
GMK3060
13.12.2018
4.3.3 Using the emergency stop switches
H
Do not operate the emergency stop switch to switch the engine off in normal oper-
ation. Only operate the emergency stop switch in an emergency situation.
Three emergency stop switches are provided for
emergency use:
• Press an active emergency stop switch.
– The switch latches.
– The engine switches off.
If an air intake inhibitor is present, this is then
triggered.
Resetting the
emergency stop
switch
You can restart the engine only after you have reset the emergency stop switch.
• Switch off the ignition.
• Turn the actuated emergency stop switch until it disengages again.
If air intake inhibitors are fitted, you must open them;
à Opening the air intake inhibitor, p. 4 - 21.
1 At the carrier – always active
2 In the crane cab – always active
3 Only active for connected hand-held control
– in addition to (1) and (2)
To Next Page
Loading...
Need help?
General
