Malfunctions during crane operation
14.1 Emergency stop switch
Operating manual 3 302 819 en 14 - 1
GMK3060
13.12.2018
14 Malfunctions during crane operation
14.1 Emergency stop switch
Four emergency stop switches are provided for
emergencies.
• Press an active emergency stop switch.
– The switch latches.
– The engine switches off.
After activating an emergency stop switch;
à Resetting the emergency stop switch, p. 4 - 20.
H
The battery master switch cannot be used as an emergency stop switch for the
engine. The engine continues to run after the battery master switch has been
switched off.
G
Risk of overloading if used improperly!
Press the emergency stop switch only if it is no longer possible to stop the crane
movements with the normal operating elements.
The emergency stop switch stops the crane movements suddenly. This may
overload the truck crane, e.g. in the event of high working speeds and large
working radii.
1 At the carrier – always active
2 In the crane cab – always active
3 Only active for connected hand-held
control – in addition to (1) and (2)
To Next Page
Loading...
Need help?
General
