Crane operation
11.1 Before operating the crane
Operating manual 3 302 819 en 11 - 23
GMK3060
13.12.2018
11.1.9 Setting the time
•
Open the Set display brightness and date/time menu (1).
• Select and confirm the symbol (1).
Setting the time
• Select and confirm the symbol (2).
• Elect the current time – expressed as a
deviation from UTC time.
• Confirm the selection. The newly set time is
shown on the display (6).
Switching the display type
• Select and confirm the display (3).
• Select the symbol for the desired display type.
• Confirm the selection, the selected display type
becomes orange.
You can Cancel the input at any time.
• Press button (1) – no values are changed.
4 24 hours
5 12 hours AM/PM
To Next Page
Loading...
