Malfunctions in driving mode
8.5 Emergency operation and breakdown assistance
Operating manual 3 302 819 en 8 - 27
GMK3060
13.12.2018
8.5 Emergency operation and breakdown assistance
8.5.1 Externally starting the truck crane
• Start the engine of the auxiliary vehicle.
• (A) – Connect the cable (1) to the power supply
(24 V) of the auxiliary vehicle.
• Insert the plug (2) in the socket (3).
• Start the truck crane engine.
If the engine does not start, release the ignition
key after about 15 seconds and wait one minute
before trying again.
• (B) – Unplug the plug (2).
• Close the socket (3).
• Remove the cable (1) from the auxiliary vehicle.
The socket (3) can also be used as a power
source for another vehicle (with a 24 V on-board
network).
To Next Page
Loading...
