Crane operation
11.6 Settings and displays for crane operation
Operating manual 3 302 819 en 11 - 129
GMK3060
13.12.2018
11.6 Settings and displays for crane operation
This section only describes settings and displays needed during crane operation.
Operating elements that can be assigned to other procedures are described with
the corresponding procedures.
11.6.1 Inclining the crane cab
With the appropriate equipment, you can incline the crane cab to the rear in order
to attain a better sitting position when working at great heights.
• Close the crane cab door.
(A) – Incline to the rear
• Press the switch next to symbol (1).
(B) – Incline to the front
• Press the switch next to symbol (1).
The crane cab will tilt as long as you hold the
button down or until its end position is reached.
G
Risk of accidents due to objects overturning in the crane cab!
Close the crane cab door before inclining and remove all loose objects
(for example, bottles) from the crane cab.
This prevents objects tipping over, the crane cab door opening by itself, and
unintended operational accidents caused by fright.
To Next Page
Loading...
Need help?
General
