Operating elements for crane operation
9.1 Overview of the operating elements
9 - 14 3 302 819 en Operating manual
GMK3060
13.12.2018
9.1.4 Control lever configuration
The truck crane can be equipped with two different control lever configurations.
The current configuration of the control levers is indicated by symbols.
The symbols are on the handles (1) or the panels (2) depending on the
control lever version.
Version 1 In version 1, the left control lever is configured with the Telescope function.
Left control lever Right control lever
1 Slewing to the left 5 Raising
2 Slewing to the right 6 Lowering the boom
3 Extend 7 Lower the main hoist
4 Retract 8 Lift the main hoist
To Next Page
Loading...
