Overview
1.11 EC Declaration of Conformity
1 - 34 3 302 819 en Operating manual
GMK3060
13.12.2018
1.11 EC Declaration of Conformity
On initial delivery, operators of truck cranes
receive a Declaration of Conformity as a supple-
ment to the delivery protocol. An illustration of the
Declaration of Conformity is shown below.
The enclosed Declaration of Conformity is valid
only if the truck crane complies with all of the
guidelines and standards specified in the EC
Declaration of Conformity. This applies in
particular to the programming and function of
the overload protection. Only then does the truck
crane receive a CE mark upon delivery.
The Declaration of Conformity shall become inva-
lid and the CE mark must be removed if any
modifications that do not comply with the
specified guidelines and standards are made
to the crane.
Please refer to the additional information provided
on the EC Declaration of Conformity supplied.
To Next Page
Loading...
Need help?
General
