Driving mode
5.2 Operating the transmission
Operating manual 3 302 819 en 5 - 33
GMK3060
13.12.2018
5.2.7 Changing the driving direction
•
Stop the truck crane.
• Shift to the position for the opposite direction.
At a standstill, you can shift two levels in succession immediately.
You do not need to wait for the intermediate position N to appear.
The newly engaged gear will be shown in the display.
H
The transmission switches to neutral position if you switch between the positions
D and R directly when the truck crane is moving or you are driving it.
5.2.8 Stopping the truck crane
• In order to stop, remove your foot from the accelerator and press the brake
pedal.
The transmission declutches shortly before the vehicle comes to a halt.
The current gear remains engaged.
Stopping for a
long period of time
If you stop for more than 1 to 2 minutes with the engine running, you need to
perform the following to protect the clutch:
– Apply the parking brake and
– Shift the transmission to neutral.
To Next Page
Loading...
Need help?
General
