Transport
7.1 Transport with transport vehicle
7 - 4 3 302 819 en Operating manual
GMK3060
13.12.2018
7.1.2 Driving the truck crane on to the transport vehicle and lashing
down
Driving on
• Drive the truck crane onto the trailer. Apply the
parking brake immediately, and switch the
engine off.
• Close all the doors.
Lashing
• Secure the truck crane with the chocks (1).
• Lash the truck crane down at the slinging
points (2). Ensure that no attachments, cables
or hoses are damaged in this process.
G
Risk of accidents due to inadequate field of vision!
Always have a banksman on hand to help when driving onto a transport vehicle.
Maintain eye contact or radio contact with the banksman at all times while driving
on to the transport vehicle. This helps ensure that you do not drive on to the
transport vehicle at an angle, resulting in the truck crane falling off the transport
vehicle.
G
Risk of accidents due to falling parts!
Use only suitable lifting gear with sufficient load bearing capacity and use only
the slinging points provided.
To Next Page
Loading...
Need help?
General
