Manitowoc GROVE GMK3060

Driving mode
5.3 Driving and parking the truck crane
Operating manual 3 302 819 en 5 - 49
GMK3060
13.12.2018
5.3.7 Cleaning the exhaust system
Information regarding the lamps and symbols
All displays occur simultaneously on the instru-
ment panel and the CCS display;
à Information
regarding the lamps and symbols, p. 5 - 45.
Automatic
cleaning
The exhaust system cleaning procedure usually runs automatically, unless it has
been manually disabled;
à Disabling cleaning, p. 5 - 51.
The lamp (1) flashes during automatic cleaning.
The lamp (2) will light up due to the increased temperature.
s
G
Risk of burns during the cleaning procedure!
The exhaust system can heat to over 600 °C (1,110 °F) during automatic and
manual cleaning.
Keep away from the exhaust system and ensure that no persons on the carrier
are in the region of the exhaust system or exhaust pipe. This will prevent severe
burns.
G
Risk of fire!
Ensure that no inflammable materials or liquids are in the vicinity of the exhaust
system or exhaust pipe before performing a cleaning procedure. Also observe all
information in the enclosed engine manufacturer's operating instructions.