Starting/switching off the engine – for crane operation
10.3 Starting the engine – with the hand-held control
10 - 10 3 302 819 en Operating manual
GMK3060
13.12.2018
10.3 Starting the engine – with the hand-held control
Starting with the hand-held control is only intended for emergency operation and
allows derricking of the main boom during rigging;
à Emergency operation with the hand-held control, p. 14 - 43.
10.4 Switching off the engine
10.4.1 When the hand-held control is connected
H
The engine can only be switched off using the hand-held control or via an
emergency stop switch.
• Press the (1) button once – the engine switches off.
G
Risk of accident by suspended loads!
Never switch off the engine while a load is suspended. You must have the control
levers at hand in order to intervene at any time.
Always set down the load before you leave the crane cab.
To Next Page
Loading...
Need help?
General
