Malfunctions in driving mode
8.3 Warning and error messages
8 - 16 3 302 819 en Operating manual
GMK3060
13.12.2018
8.3.4 Error messages on the CCS display
•
If an error message occurs, stop while taking the traffic situation into consider-
ation;
à Procedure in the event of a malfunction in road traffic, p. 8 - 2.
The symbol (1) or (3) flashes when the CCS has
detected an error. The symbols flash alternately
when both error types are present.
(1) – Crane operation error
The buzzer tone sounds once.
• Open the Crane operation error menu (2).
For the subsequent procedure;
à p. 14 - 8.
(3) – Engine/transmission error
• Switch off the engine immediately.
• Open the Engine/transmission error menu (4).
Display of error / total errors
Display (2) shows the error total, and display (1)
shows which error is displayed.
3/5, for example, means:
– Error 3 is shown
– A total of 5 errors are pending.
Displaying errors
• Select and confirm the symbol (3) or (4) to show
any additional errors.
G
Risk of accidents!
The crane control system may only be repaired by properly qualified personnel.
3 Next error
4 Previous error
To Next Page
Loading...
