Starting/switching off the engine – for crane operation
10.4 Switching off the engine
Operating manual 3 302 819 en 10 - 11
GMK3060
13.12.2018
10.4.2 In the crane cab
At the ignition lock
• Turn the ignition key to position 0 – the engine switches off.
With the idling button
• Press the button (1) in at the bottom and hold it pressed.
– After about 3 seconds the idling speed will be at the standard value.
– After a further about 3 seconds, the engine will switch off – the crane control
remains switched on.
It is only possible to restart the engine when approx. 7 seconds have
elapsed.
After switching off Refer to the instructions in the respective sections for each type of stopping work;
à In case of short work breaks, p. 11 - 151,
à In case of work breaks longer than 8 hours, p. 11 - 152.
To Next Page
Loading...
Need help?
General
