Basic safety instructions
2.1 Intended use
2 - 2 3 302 819 en Operating manual
GMK3060
13.12.2018
2.1.1 Improper use
Die Manitowoc Crane Group Germany GmbH is not liable for damage resulting
from improper or unauthorized use of the GMK3060 truck crane. The user alone
bears the risk.
Improper use includes:
– Transporting loads on the carrier
– Pushing, pulling or lifting loads with the level adjustment system, outrigger
beams or outrigger cylinders
– Pushing or pulling loads or lifting them off the ground using the slewing gear,
derricking gear or telescoping mechanism
– Pulling off fixed objects with the crane
– Ramming and pulling of sheet-pile walls, sheet piles, beams etc.
– Two-hook operation with the boom extension and two-hook operation on the
main boom head without additional equipment
– Setting RCL codes that do not correspond to the actual rigging mode
– Working with an overridden RCL or overridden lifting limit switch
– After RCL shutdown, increasing the working radius by pulling the raised load at
an angle (e.g. with a chain hoist)
– Misuse of the outrigger pressure display as a safety function to prevent the
crane from overturning (outrigger pressure higher than 0 t)
– On-road driving in an impermissible driving mode (axle load, dimension).
– Moving the rigged crane in an impermissible driving mode
– Using equipment that is not permitted for the crane
– Transporting people in any way using the lifting tackle, on the load, or in the
crane cab while driving
– Transporting passengers outside the driver's cab
– Loading and unloading work, i.e. continuous operation without a corresponding
break
– Use for any kind of sport or recreation event, especially for bungee jumping.
To Next Page
Loading...
Need help?
General
