Crane operation
11.1 Before operating the crane
11 - 22 3 302 819 en Operating manual
GMK3060
13.12.2018
Switching off the
houselock
• Check that the slewing gear is switched off, and switch if off if it is not;
à Switching off the slewing gear, p. 11 - 20.
• Select the symbol (4).
• Press the button until the symbol (3) is dis-
played – Houselock switched off.
The display first shows the symbol (1), then
symbol (2) in the intermediate position and then
symbol (3) when the houselock is switched off.
S
Risk of damage during slewing!
Always switch off the slewing gear before you operate the houselock. The sys-
tem will be damaged if the superstructure is slewed during the locking procedure.
To Next Page
Loading...
Need help?
General
