Driving mode
5.1 Before driving
Operating manual 3 302 819 en 5 - 11
GMK3060
13.12.2018
Third brake light If a third brake light is present, then you must check to ensure it is correctly
connected.
One brake light (1) is at the rear of carrier.
If a storage box is present, then there is another
brake light (2) there.
For versions without storage box
For on-road driving, the brake light (1) must be
connected to the socket (3).
For versions without storage box
For on-road driving, the brake light (2) must be
connected to the socket (3).
The plug of the brake light (1) must be inserted in
the dummy socket (4).
S
Risk of damage to the connecting cables!
Always check before driving whether the plugs are plugged into the required
sockets and always disconnect the connecting cables before disassembling the
storage compartment.
In this way, you can prevent the connecting cables from loosely hanging down
and getting dirty, caught or torn off while driving.
Carry out a function check before driving.
To Next Page
Loading...
Need help?
General
