Starting/switching off the engine – for crane operation
10.1 When starting the engine for the first time in the day
10 - 2 3 302 819 en Operating manual
GMK3060
13.12.2018
When not driving from the crane cab:
• Remove the ignition key.
If you want to drive from the crane cab:
• Turn the ignition key to position 1.
Driving from the crane cab is enabled and the steering lock is prevented from
engaging while driving;
à Preparing to drive, p. 13 - 14.
H
Lock the driver's cab for protection against unauthorised use.
To Next Page
Loading...
