Overview
1.5 Technical data
1 - 18 3 302 819 en Operating manual
GMK3060
13.12.2018
Main boom
Lattice extension As additional equipment;
à Lattice extension operating manual.
Operating speeds The specified operating speeds only apply to an engine speed of
approx. 1,500 rpm/1850 rpm without a load.
Main boom lengths: 9.6 m to 42.9 m (31.5 ft to 140.7 ft)
Main boom head: 5 sheaves
6 sheaves
1)
Cylinder: One single-level telescoping cylinder with
locking/unlocking mechanism
Power unit group
Telescoping mechanism: M 1 (to ISO 4301 - 2)
1)
Additional equipment
Main hoist: Rope speed when lifting
Normal speed: maximum 65 m/min (213 ft/min)
High-speed mode: maximum 125 m/min (410 ft/min)
Auxiliary hoist: Rope speed when lifting
Normal speed: maximum 65 m/min (213 ft/min)
High-speed mode: maximum 125 m/min (410 ft/min)
Slewing gear: 0 to 2.5 revolutions per minute (without load)
Telescoping
mechanism:
extend
from 0 -0 - 0 - 0 - 0 to 100 - 100 - 100 - 100 - 100
approx. 300s In automatic mode during uninter-
rupted locking and telescoping
processes
Derricking gear: Derricking between - 2.7° and 82°
Normal speed: Raising: approx. 60 s
High-speed mode: Raising: approx. 30 s
To Next Page
Loading...
Need help?
General
