NANOTEC PD4-C - 1010 H Store Parameters

9 Description of the object dictionary
Object description
Index 100A
h
Object name Manufacturer Software Version
Object Code VARIABLE
Data type VISIBLE_STRING
Savable no
Access read only
PDO mapping no
Allowed values
Preset value FIR-v1650-B527540
Firmware version FIR-v1426
Change history
1010h Store Parameters
Function
This object is used to start the saving of objects.
Object description
Index 1010
h
Object name Store Parameters
Object Code ARRAY
Data type UNSIGNED32
Savable no
Firmware version FIR-v1426
Change history
Firmware version FIR-v1436: "Object name" entry changed from
"Store Parameter" to "Store Parameters".
Firmware version FIR-v1436: The number of entries was changed
from 3 to 4.
Firmware version FIR-v1512: The number of entries was changed
from 4 to 5.
Firmware version FIR-v1540: The number of entries was changed
from 5 to 7.
Value description
Subindex 00
h
Name Highest Sub-index Supported
Data type UNSIGNED8
Access read only
PDO mapping no
Allowed values
Preset value 06
h
Version: 2.0.1 / FIR-v1650 113