NANOTEC PD4-C - 1018 H Identity Object

9 Description of the object dictionary
Allowed values
Preset value 00000001
h
Subindex 06
h
Name Restore Tuning Default Parameters
Data type UNSIGNED32
Access read / write
PDO mapping no
Allowed values
Preset value 00000000
h
Description
If the value 64616F6C
h
(or 1684107116
d
or ASCII load) is written in this object, part or all of the object
dictionary is reset to the default values. The subindex that is used decides which range is reset.
For a detailed description, see chapter Discarding the saved data.
1018h Identity Object
Function
This object returns general information on the device, such as manufacturer, product code, revision and
serial number.
Tip
Have these values ready in the event of service inquiries.
Object description
Index 1018
h
Object name Identity Object
Object Code RECORD
Data type IDENTITY
Savable no
Firmware version FIR-v1426
Change history
Value description
Subindex 00
h
Name Highest Sub-index Supported
Data type UNSIGNED8
Access read only
PDO mapping no
Allowed values
Preset value 04
h
Version: 2.0.1 / FIR-v1650 117