95
Programming Manual
Program 14: Trunk Basic Setup
14-08: Music on Hold Source for Trunks
SA
SB
COP
IN
Description
Use Program 14-08 : Music on Hold Source for Trunks to define a trunk’s Music on Hold source as either the
ACI or BGM port.
Note: If ACI is selected as the source in Item 1, the port number for the source must be selected in Item 2.
Input Data
Trunk Port Number
1-51
Prog. No. Item Input Data Default
14-08-01
MOH Type
Select a trunk’s
Music on Hold
source.
0 : Internal synthesized MOH
1 : A customer-provided source connected to BGM port.
2 : A customer-provided source connected to ACI port.
0
14-08-02
Source Port
Number for
MOH
0-6
If the MOH type is “2”, the source port number is 0-6.
0
Conditions
None
Feature Cross Reference
Music on Hold
Telephone Programming Instructions
To enter data for Program 14-08(Music on Hold Source for Trunks):
1. Enter the programming mode.
2. Enter 14 08
3. Enter the number of the item you want to program.
4. Select the Trunk port number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
14-08-01 Trunk1
MOH Type 1
14-08-xx Trunkxx
xxxxx
To Next Page
Loading...
